Australian 3 Pin Plug to IEC Female C13 Curly Cord.
We now have three versions. All of these options have Very Strong Spring Force.
| Part Number | ||
| PRO-3PP-C13-2M-CC | ||
| 3 Pin Plug to IEC Female C13 Curly Cord Conductor Size 0.75mm² 2m length (before coiling) Approx. 230mm coil, 100mm tails. Extends to Approx. 1m Max |
||
| Qty | Unit Cost | Ordering Link |
| 1-9 | $21.00 | Click here to order |
| 10-99 | $16.50 | Click here to order |
| 100+ | $13.50 | Click here to order |
| Part Number | ||
| PRO-3PP-C13-3M-CC | ||
| 3 Pin Plug to IEC Female C13 Curly Cord Conductor Size 0.75mm² 3m length (before coiling) Approx. 300mm coil, 100mm tails. Extends to Approx. 1.5m Max |
||
| Qty | Unit Cost | Ordering Link |
| 1-9 | $31.50 | Click here to order |
| 10-99 | $24.75 | Click here to order |
| 100+ | $20.25 | Click here to order |
| Part Number | ||
| PRO-3PP-C13-5M-CC | ||
| 3 Pin Plug to IEC Female C13 Curly Cord Conductor Size 1.0mm² 5m length (before coiling) Approx. 630mm coil, 100mm tails. Extends to Approx. 2.5m Max |
||
| Qty | Unit Cost | Ordering Link |
| 1-9 | $52.50 | Click here to order |
| 10-99 | $41.25 | Click here to order |
| 100+ | $33.75 | Click here to order |
All +GST
We can also supply short little adapter cords, to convert the above cords into curly extension cords.
When ordered with one of the above cords the price is:
| PRO-3PS-C14-AC | 3 Pin Mains Socket, to IEC C14 Adapter Cord |
$8.50
+GST |
Click here to order |
I regularly supply a number of 3 Pin Plug to IEC Female C13 2m length unit except with a 90 degree IEC Female and a straight cable
Approximately 50 – 100 are destroyed each quarter and if above is available may provide as a solution.
Additionally I am after a curly cord to run from Vehicle to Hiab on Trailer running 12V from vehicle alternator to trailer mounted battery. Anderson plugs I presume would be ideal for this application but I was unable to locate anything on the site.
Regards,
Anthony
Hi Anthony,
I just tried to call you, and sent you an email.
All the best…
Paul.
Hi ,
I was wondering how much this lead was & if it was possible to get it without the C13 end? Also what size cable is it?
I was hoping to use it to run from a power point (plugged in) to another power point (hard wired) mounted in the back of a bathroom vanity drawer.
Regards,
Clint.
Hi Clint,
We have mains cords without plugs here: https://www.curlycords.com.au/curlycords/power-and-control-curly-cords-pvc-mains-flex/
I’ll email you a quick price now…
Best regards
Paul.
Hi i was wondering if you had a 90 deg ( to the side) iec cable with a15cm tail, 1meter stretch is fine or anything close to that, any colour is fine too.
Hi George,
Sorry these are the only ones we have at present.
I might have some IEC Right angle leads, but only straight. (Not curly)
Best regards
Paul.
Hi are they able to be used for kettles?
Regards Rupert
Hi Rupert,
Sorry…No.
The high temp kettle fittings have a slot in the top of the connector to prevent these normal IEC cords being used.
We could probably get some made, but would likely need to do a run of a couple of hundred of them.
Hi I need2meters curly extensions cable lead ( exactly like the ordinary extension)
Please advise
Hi Sam,
Sorry…we don’t have any curly domestic extension leads with molded connectors.
(As far as I know they don’t exist)
Our mains curly cords are usually only used for commercial, and industrial applications.
We can supply curly mains cords, but the ends need to be fitted by a licensed electrician.
Hi Paul … It’s been a couple of years since the question has been asked so here goes … Can you do the PRO-3PP-C13-2M-CC cable with an IEC right-angle entry plug? … and … what size conductors does it have? … I’m presuming it’s rated at 10 amps?
Cheers, Greg
See my other post. 🙂
hi i am after a 3 core 10 240 volt curly cord 3 mts when stretched out , and also a 12 volt 4 core 5 amp curly cord 3 mts when stretched out can you supply these cables pls
thanks Bruce
Hi Bruce,
I’ll shoot you a quick email now…
Hi Paul, do you have these leads with a 90 degree IEC plug on one end,needs to be curly, thank you,
Regards Tony.
Hi Tony,
I just sent you an email.
Thanks Paul I’ll check with my electrician and will get back to you
Great thanks a lot